Roller Type Automatic Tracked Type Sand Blasting Machine for Stamping Heat Treatment of Workpiece Descaling
Product Description
This equipment is mainly composed of sand blasting machine, track rotating mechanism, high efficiency separator, dust removal system, electrical control system, compressed air (customer-supplied) and so on.
Main technical parameters
|
Model
|
STR-LD
|
|
Air end shape dimensions
|
L1140×W1000×H1860mm
|
|
Roller size
|
500×600mm
|
|
Every processing capacity
|
30-50kg
|
|
Roller motor
|
50HZ ac 380V 3-11KW
|
|
Roller speed
|
10RPM
|
|
Separator moto
|
380V 50HZ 3KW
|
|
Air source requirement
|
pressure 2-7 kg/cm2
|
|
Gas consumption
|
1m3/min
|
Application
1, sandblasting host
The main body is welded by a 3mm thick carbon steel plate, and the inner and outer surfaces of the engine room are painted.
There is a vent at the back;
2. Track rotation mechanism
The track rotation mechanism is driven by a reducer, and the power of the reduction motor is 1.5Kw;
This machine is equipped with 6 high-efficiency spray guns, which are made of high wear-resistant boron carbide material. Specifications: φ8*φ20*60.
3, high efficiency separator
The separator is an important part of the equipment, which can effectively separate the good abrasive and dust, and ensure the abrasive loss can be saved under the premise of efficient processing of the workpiece.
If the separation effect of the separator is not good, it will affect the processing efficiency of the equipment and affect the dust removal effect of the whole machine.
4, dust removal system
The dust removal system consists of a filter element, a pulse backflushing, a body, a dust collecting bucket, and a dust removing fan.
1) The body is made of 2mm cold-rolled steel plate, and the inner and outer surfaces are painted.
Dimensions: 1000x1000x2450 mm
2), 4 filter elements, ø350*660 mm
3), dust removal fan power: 4 Kw
Product Tags:
|
|
Roller Tracked Type Sandblasting Machine / Automatic Sandblasting Machine Images
|
